3D mesh fence heights and dimensions: panel and post guide
Published 18/11/2026 11 min read

What are the standard 3D mesh fence heights and dimensions?
3D mesh fence heights and dimensions in our range follow one simple pattern: every panel is 2500 mm long, and the height comes in six steps: 750, 1000, 1200, 1500, 1700 and 2000 mm. Each height has a matching plate-mount post of 60×60×1.2 mm section. The post lengths we stock are 750, 1000, 1200, 1500, 1700 and 2000 mm, so you pair a panel with the post of the same nominal height. Everything below explains how to choose between these sizes, what each one costs, and what to check on your plot in Croatia before you order.
Which panel heights can I order, and what do they cost?
Prices are per piece. Each line below gives the current price and, in the same sentence, the price recorded on 10.9.2026.
- The 750 × 2500 mm panel costs 9.50 EUR excl. VAT (11.88 EUR incl. VAT), and on 10.9.2026 it was 9.50 EUR excl. VAT (11.88 EUR incl. VAT).
- The 1000 × 2500 mm panel costs 10.50 EUR excl. VAT (13.13 EUR incl. VAT), and on 10.9.2026 it was 10.50 EUR excl. VAT (13.13 EUR incl. VAT).
- The 1200 × 2500 mm panel costs 12.50 EUR excl. VAT (15.63 EUR incl. VAT), and on 10.9.2026 it was 12.50 EUR excl. VAT (15.63 EUR incl. VAT).
- The 1500 × 2500 mm panel costs 16.00 EUR excl. VAT (20.00 EUR incl. VAT), and on 10.9.2026 it was 16.00 EUR excl. VAT (20.00 EUR incl. VAT).
- The 1700 × 2500 mm panel costs 18.00 EUR excl. VAT (22.50 EUR incl. VAT), and on 10.9.2026 it was 18.00 EUR excl. VAT (22.50 EUR incl. VAT).
- The 2000 × 2500 mm panel costs 20.00 EUR excl. VAT (25.00 EUR incl. VAT), and on 10.9.2026 it was 20.00 EUR excl. VAT (25.00 EUR incl. VAT).
The 1200 mm panel is marked as our most chosen size. For the full range and current availability, see the 3D mesh fences page.
Which posts match which panel height?
Posts are sold separately from panels and are plate-mounted, meaning each post has a base plate that is fixed to a prepared surface rather than set in a hole. The section is 60×60×1.2 mm for every length. The options and prices per piece, each with its 10.9.2026 price in the same sentence:
- The 750 mm post costs 7.50 EUR excl. VAT (9.38 EUR incl. VAT), and on 10.9.2026 it was 7.50 EUR excl. VAT (9.38 EUR incl. VAT).
- The 1000 mm post costs 8.50 EUR excl. VAT (10.63 EUR incl. VAT), and on 10.9.2026 it was 8.50 EUR excl. VAT (10.63 EUR incl. VAT).
- The 1200 mm post costs 9.50 EUR excl. VAT (11.88 EUR incl. VAT), and on 10.9.2026 it was 9.50 EUR excl. VAT (11.88 EUR incl. VAT).
- The 1500 mm post costs 11.00 EUR excl. VAT (13.75 EUR incl. VAT), and on 10.9.2026 it was 11.00 EUR excl. VAT (13.75 EUR incl. VAT).
- The 1700 mm post costs 12.50 EUR excl. VAT (15.63 EUR incl. VAT), and on 10.9.2026 it was 12.50 EUR excl. VAT (15.63 EUR incl. VAT).
- The 2000 mm post costs 15.00 EUR excl. VAT (18.75 EUR incl. VAT), and on 10.9.2026 it was 15.00 EUR excl. VAT (18.75 EUR incl. VAT).
The rule is simple: choose the post whose nominal length equals the panel height. A 1200 mm panel goes with a 1200 mm post, a 1500 mm panel with a 1500 mm post, and so on. Do not mix heights between panel and post, because the fixing points are designed for the matched pair.
How do I choose the right height for my plot?
Height should follow the job the fence has to do, not the other way round. These are practical guidelines rather than hard rules:
- 750 and 1000 mm: low boundary marking, flower beds, edges along paths, and keeping small children or pets within a yard. They mark a limit without blocking the view.
- 1200 mm: the usual choice for front gardens and residential boundaries. It is clearly visible as a boundary, easy to see over, and our most chosen height.
- 1500 and 1700 mm: a stronger deterrent and better containment for larger dogs, while still keeping an open, airy look.
- 2000 mm: maximum height in our range, suited to perimeters where you want a tall barrier, such as around a storage area, a work yard or a larger property.
If you are unsure, think about who or what the fence must keep in or out. A fence for a small garden bed has very different needs from one around a yard with a large dog.
How many panels and posts will I need?
Because every panel is 2500 mm long, the count is straightforward arithmetic on your boundary length. Divide the total length by 2.5 m and round up to get the number of panels. For a straight run you need one more post than you have panels, since each panel sits between two posts and the end posts are shared with neighbouring panels. Every corner and every change of direction also needs its own post, so a rectangular plot needs more posts than the bare division suggests.
Measure along the line where the fence will actually stand, not along the edge of the plot on paper. Walls, slopes, trees and steps all change the real length. If the length does not divide neatly by 2.5 m, the last section needs a decision: adjust post positions slightly across the run, or discuss a custom cut with us during measurement. Do not simply stretch a panel beyond its length.
You can enter your lengths in the 3D mesh fence calculator to get the quantities and a price for your configuration. For a quick count by hand, the rule above is enough.
What is included, and what costs extra?
The prices above are for panels and posts as separate items. Your order may also involve items that are not part of those unit prices, and these depend on the site:
- Gates are a separate product. See the fence gates page for the options.
- Fixing hardware and any base preparation depend on your surface and configuration. We confirm what is needed when you request a quote.
- Removal of an old fence is not assumed in any price and has to be discussed in advance.
- Delivery and installation are not priced from a table. They are calculated per order after measurement. Collection at our warehouse is free.
This is why a total for your whole fence cannot honestly be given from a price list alone. The unit prices above are exact, but the final figure depends on length, corners, surface, gates and how the fence gets to you.
What should I prepare on the ground before installation?
Plate-mount posts are fixed to a surface, so the base matters more than with a post set into soil. Good surfaces are a concrete strip, a concrete or masonry wall, or a curb. Check these points before the installation date:
- The surface should be level, solid and wide enough for the base plate with room around its fixing points.
- Along slopes, plan the run in steps or sections so each panel remains aligned with its posts.
- Access for the installers and materials should be clear: no parked vehicles, stacked materials or overgrown vegetation along the line.
- Know where underground services such as water, power and drainage run before anything is drilled.
If the base is missing, a concrete foundation or curb has to be built first. Plan for this in your schedule, because concrete needs time to cure before posts are fixed to it.
What are the Croatian rules on fence height and the boundary?
You are buying a fence that will stand in Croatia, so Croatian rules apply, whatever applies in your home country. The permitted fence height, the distance from the boundary line and whether a neighbour's consent is needed can depend on your municipality and on the exact location of the plot. We cannot tell you in advance that no permit or approval is required, and we cannot promise the process will be quick or simple.
The safe approach is to check with the competent office of your municipality or town before ordering, especially for the taller panels of 1500, 1700 and 2000 mm, and for any fence directly on a boundary shared with a neighbour. Ask three questions: what is the maximum fence height here, how far from the boundary must it stand, and is a neighbour's written consent required. Get the answers in writing if you can. A fence ordered to the wrong height is a much more expensive problem than a short call to the municipality.
How do 3D mesh panels compare with lamella and glass fences?
3D mesh is an open, see-through fence. It keeps light and views, suits security and containment, and is practical where privacy is not the main goal. If you want privacy, a different fence type is the better fit.
The lamella fence gives a more solid, closed look and is sold per running metre, in heights from 600 to 1800 mm. For example, the 1200 mm lamella height costs 59.00 EUR/m excl. VAT, and on 10.9.2026 it was 59.00 EUR/m excl. VAT. The glass fence suits terraces and balconies where you want a view and a premium look. Compare them side by side on the all fence types page before deciding.
Common mistakes when choosing 3D mesh heights and dimensions
- Choosing by price alone. A lower panel is cheaper per piece, but if it does not do the job, you pay twice.
- Mismatching panel and post heights. Always pair a panel with the post of the same nominal height.
- Forgetting the extra post. A run needs one more post than panels, plus a post at every corner.
- Measuring on paper only. Real distances differ from plans. Measure on site.
- Ignoring the base. Plate-mount posts need a solid, level surface.
- Skipping the municipality check. Height and boundary distance rules vary by location.
How does ordering and installation work, step by step?
- Decide the fence line and note rough lengths and corners.
- Check height and boundary rules with your municipality.
- Use the calculator or send us an enquiry with your plot details.
- We arrange a site measurement and confirm quantities and the final price.
- You choose collection at our warehouse, which is free, or delivery, which is calculated per order.
- Installation follows once the base is ready.
Our warehouse and showroom are at II. Dragošićkin odvojak 17, 10370 Dragošička (Rugvica), Croatia, so you can see the products in person.
Frequently asked questions
How long is each 3D mesh panel?
Every panel in our range is 2500 mm long. Only the height changes: 750, 1000, 1200, 1500, 1700 or 2000 mm.
What is the tallest panel available?
The tallest is 2000 mm high, paired with a 2000 mm post.
Which height is chosen most often?
The 1200 mm panel is marked as our most chosen height. It suits many residential boundaries.
Are posts included in the panel price?
No. Panels and posts are separate items with their own prices, shown above.
Can I install the fence on soil?
Posts are plate-mount, so they are designed for a solid surface such as concrete or masonry. Discuss your ground with us at measurement.
Do I need a permit or neighbour's consent?
This depends on your municipality and the plot location. Check with the competent office before ordering. We cannot confirm in advance that none is needed.
How much will installation cost?
Installation is calculated per order after measurement, not from a fixed figure. Collection at the warehouse is free.
Next step: get your measurements and a quote
Now that you know the sizes, the quickest route is to put your own lengths into the 3D mesh fence calculator. For an exact figure including site measurement, delivery and installation, ask for a quote and a site measurement, and we will confirm everything for your plot in Croatia.